VAN CÔNG NGHIỆP - ĐẦU NỐI - KHỚP NỐI

INSTRUMENT VALVE - SS 316

Return to Previous Page

Showing all 9 results

H-99 Screwed Bonnet Needle Valve
H-99 Screwed Bonnet Needle Valve
DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Standard plug materials
  • Stainless Steel 1.4308, ASTM A351 CF8
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Special materials
  • Carbon Steel 1.0619, ASTM A216 WCB
  • Stainless Steel 1.4408, ASTM A351 CF8M
  • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352
Three Piece Ball Valve- H500
Three Piece Ball Valve- H500
The H-500 Ham-Let Valve is a moderate-pressure instrumentation Ball Valve for general service and instrumentation panels. The valves offer large ports for high flow, tight shutoff, long-life service and low operating torque. The H-500 Series can be used for bi-directional flow, is rated to max. 3000 psig (204 Bar) and performs on/off service. Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel Blow-out proof stem with Belleville washer design for long life stem sealing Manual Operation with integral locking device Flow coefficient (Cv) from 1.2 to 24.0 MAWP 3000 psig (204 Bar) MAWT 450°F (232°C) Size: 1/4; 3/8; 1/2; 3/4 and 1 inch H-500S is available with TFM1600 seat material as standard.  
Toggle Valves - H1200
Toggle Valves – H1200
The H-1200 Series standard toggle valve is a compact design for normally closed and quick on/off service. Moving the handle 90 degrees upwards opens the valve to full flow and stops it firmly in the open position. Shifting the handle position downwards shuts off the valve by spring return. The PTFE soft seat at the tip of the stem provides a positive repetitive seal.  
H-99 Screwed Bonnet Needle Valve
H-99 Screwed Bonnet Needle Valve
DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Standard plug materials
  • Stainless Steel 1.4308, ASTM A351 CF8
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Special materials
  • Carbon Steel 1.0619, ASTM A216 WCB
  • Stainless Steel 1.4408, ASTM A351 CF8M
  • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352
H-300U Integral Bonnet Needle Valve
H-300U Integral Bonnet Needle Valve
DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Standard plug materials
  • Stainless Steel 1.4308, ASTM A351 CF8
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Special materials
  • Carbon Steel 1.0619, ASTM A216 WCB
  • Stainless Steel 1.4408, ASTM A351 CF8M
  • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352
H-6800 High Performance Ball Valves
H-6800 High Performance Ball Valves
DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Standard plug materials
  • Stainless Steel 1.4308, ASTM A351 CF8
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Special materials
  • Carbon Steel 1.0619, ASTM A216 WCB
  • Stainless Steel 1.4408, ASTM A351 CF8M
  • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352
H-800 Compact One-Piece Ball Valves
H-800 Compact One-Piece Ball Valves
DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Standard plug materials
  • Stainless Steel 1.4308, ASTM A351 CF8
  • Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395
Special materials
  • Carbon Steel 1.0619, ASTM A216 WCB
  • Stainless Steel 1.4408, ASTM A351 CF8M
  • Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352
Metering Valve
Metering Valve
The H-1300 Series is a moderate-pressure instrumentation flow-regulating needle valve. It is generally used for instrumentation panels, sampling systems and accurate applications. The valves are compact in size and structure and offer reliable low and moderate flow regulation with long service life. -Forged-body 316 St.St.or Brass Construction -Straight and Angle Patterns and Panel Mounting -MAWP 2000 psig - (138 bar) For HXF -MAWP 1000 psig - (69 bar) For H, HF - MAWT 400°F (204°C) -Flow coefficients (Cv) from 0.004 to 0.15  
Two Piece Ball Valve H700 series
Two Piece Ball Valve H700 series
The H-700 Series is a moderate-pressure ball valve for general service. These valves are compact in size and structure. They have relatively large ports for high flow, tight shutoff, long-life service, and low operating torque. The H-700 Series can be used for bi-directional flow in fully open or fully closed position only. The series is rated to max. 2000 psig (135 bar) and performs on/off service. MAWP 2000 psi (135 Bar) MAWT 400ºF (204ºC) Flow coefficient (Cv) 1.25 to 17.35 Size range: 1/4” to 1” or 6mm to 25mm

ENERGY CONTROL VIETNAM COMPANY LIMITED
79 Dao Duy Tu, Ward 5, District 10
Ho Chi MinH City, Vietnam.
Phone: +84 9 1903 0931
Email: enquiry@energycontrol.vn

Our Valve Solutions

Our Customers

Newsletter


    © 2018 All Rights Reserved.